{"title":"Featured instruments","description":null,"products":[{"product_id":"fluke-729-30g-fc-automatic-pressure-calibrator-12-to-30-psi-2-bar-fluke-connect","title":"Fluke 729 30G FC Automatic Pressure Calibrator, -12 to 30 psi (2 bar), Fluke Connect","description":"\u003ch2\u003eFluke 729 30G FC Automatic Pressure Calibrator\u003c\/h2\u003e\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eAutomated test templates and a built-in documentation function record as-found and as-left results, and HART communication supports smart transmitter trimming.\u003c\/p\u003e\n\u003cp\u003eFluke Connect lets you share results wirelessly, while optional 750P modules extend the range. The 729 30G FC uses its internal pressure sensor and pump; 750P series pressure modules are not included and are available on request.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatic pressure generation and regulation\u003c\/li\u003e\n\u003cli\u003e30 psi (2 bar) internal range with vacuum\u003c\/li\u003e\n\u003cli\u003eDocumenting test templates\u003c\/li\u003e\n\u003cli\u003eHART communication\u003c\/li\u003e\n\u003cli\u003eFluke Connect wireless\u003c\/li\u003e\n\u003cli\u003emA measure\/source with loop power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePressure transmitter calibration\u003c\/li\u003e\n\u003cli\u003eHART device maintenance\u003c\/li\u003e\n\u003cli\u003eDocumented field calibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFluke 729 calibrator with wireless communication\u003c\/li\u003e\n\u003cli\u003eRechargeable battery (installed) and power supply\u003c\/li\u003e\n\u003cli\u003eWireless adapter and USB cable\u003c\/li\u003e\n\u003cli\u003eStackable test leads, hook clips, alligator clips and test probes\u003c\/li\u003e\n\u003cli\u003eHose kit with push-fit adapters\u003c\/li\u003e\n\u003cli\u003eFitting adapters: 1\/8\" FNPT to 1\/4\" FNPT, 1\/8\" FNPT to F-M20, and 1\/8\" FNPT to 1\/4\" FBSP\u003c\/li\u003e\n\u003cli\u003ePTFE tape, two sintered filters, water trap drain and valve tuning hoses\u003c\/li\u003e\n\u003cli\u003eHanging clip, magnetic hanger kit and carrying strap\u003c\/li\u003e\n\u003cli\u003eSoft carrying case\u003c\/li\u003e\n\u003cli\u003eSafety sheet and Quick Start Guide\u003c\/li\u003e\n\u003cli\u003eStandard Fluke factory certificate of calibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOptional Accessories and Accredited Calibration\u003c\/h3\u003e\n\u003cp\u003eFluke 750P series pressure modules are optional accessories, available on request and not included in the standard package.\u003c\/p\u003e\n\u003cp\u003eAn accredited ISO 17025 calibration certificate is quoted separately on request. Contact us if you require this option.\u003c\/p\u003e\n\u003ch3\u003eFluke 729 30G FC Automatic Pressure Calibrator Technical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePressure range\u003c\/th\u003e\n\u003ctd\u003e30 psi (2 bar), with vacuum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePressure control\u003c\/th\u003e\n\u003ctd\u003eAutomatic pump and fine adjust\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCommunication\u003c\/th\u003e\n\u003ctd\u003eHART\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWireless\u003c\/th\u003e\n\u003ctd\u003eFluke Connect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElectrical\u003c\/th\u003e\n\u003ctd\u003emA measure\/source, 24 V loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExternal modules\u003c\/th\u003e\n\u003ctd\u003eFluke 750P series (optional, not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eManufacturer information: \u003ca href=\"https:\/\/www.fluke.com\/en-us\/product\/calibration-tools\/pressure-calibrators\/fluke-729\" target=\"_blank\" rel=\"noopener\"\u003eFluke 729 on fluke.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"Fluke","offers":[{"title":"Default Title","offer_id":67772794405051,"sku":"IMM_42486751","price":5243.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/2635\/1547\/files\/fluke-729-white.jpg?v=1793092045"},{"product_id":"megger-mit1025-vip-kit-insulation-tester-10-kv-20-tohm","title":"Megger MIT1025 VIP Kit Insulation Tester, 10 kV, 20 TΩ","description":"\u003ch2\u003eMegger MIT1025 VIP Kit Insulation Tester\u003c\/h2\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe MIT1025 is Megger's 10 kV diagnostic insulation tester with adjustable test voltage from 100 V to 10 kV. The patented PI Predictor shortens timed tests, and the RE\u0026gt;Act mode monitors reabsorption current so re-energisation decisions are based on accurate data.\u003c\/p\u003e\n\u003cp\u003eResults are stored in onboard memory and downloaded via Bluetooth to PowerDB or CertSuite software. The instrument operates from line power when the battery is discharged, recharges in about 2.5 hours, and all terminals carry a CAT IV 600 V safety rating.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTest voltages from 100 V up to 10 kV DC\u003c\/li\u003e\n\u003cli\u003eInsulation resistance up to 20 TΩ\u003c\/li\u003e\n\u003cli\u003ePI Predictor and RE\u0026gt;Act test modes\u003c\/li\u003e\n\u003cli\u003eIR, DAR, PI, DD, SV and ramp tests\u003c\/li\u003e\n\u003cli\u003eOnboard storage with Bluetooth download to PowerDB\/CertSuite\u003c\/li\u003e\n\u003cli\u003e6 mA noise immunity for substation use\u003c\/li\u003e\n\u003cli\u003eOperates from line power, 2.5 h battery charge\u003c\/li\u003e\n\u003cli\u003eCAT IV 600 V on all terminals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInsulation testing of transformers, motors and cables\u003c\/li\u003e\n\u003cli\u003eSubstation and switchgear maintenance up to 230 kV systems\u003c\/li\u003e\n\u003cli\u003ePre-commissioning and trending of high-value apparatus\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMIT1025 insulation tester (Mfg 1001-944)\u003c\/li\u003e\n\u003cli\u003e3 m leadset × 3 with medium insulated clips\u003c\/li\u003e\n\u003cli\u003ePower lead\u003c\/li\u003e\n\u003cli\u003eUSB cable\u003c\/li\u003e\n\u003cli\u003eFree transit case\u003c\/li\u003e\n\u003cli\u003eCalibration certificate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMegger MIT1025 VIP Kit Insulation Tester Technical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTest voltage\u003c\/th\u003e\n\u003ctd\u003e100 V to 10 kV DC user-adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax insulation resistance\u003c\/th\u003e\n\u003ctd\u003e20 TΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAccuracy\u003c\/th\u003e\n\u003ctd\u003e±5% to 2 TΩ, ±20% to 20 TΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTest modes\u003c\/th\u003e\n\u003ctd\u003eIR, IR(t), DAR, PI, DD, SV, ramp, RE\u0026gt;Act\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise immunity\u003c\/th\u003e\n\u003ctd\u003e6 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltmeter\u003c\/th\u003e\n\u003ctd\u003e30 V to 660 V with frequency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSafety rating\u003c\/th\u003e\n\u003ctd\u003eCAT IV 600 V on all terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBattery\u003c\/th\u003e\n\u003ctd\u003eLi-ion, field replaceable, 2.5 h charge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eContinuous testing\u003c\/th\u003e\n\u003ctd\u003eUp to 6 h at 5 kV per charge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eData transfer\u003c\/th\u003e\n\u003ctd\u003eBluetooth to PowerDB \/ CertSuite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eManufacturer information: \u003ca href=\"https:\/\/www.megger.com\/en-us\/products\/advanced-5-kv-10-kv-and-15-kv-insulation-resistance-testers\" target=\"_blank\" rel=\"noopener\"\u003eMegger 5\/10\/15 kV insulation testers on megger.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"Megger","offers":[{"title":"Default Title","offer_id":67772794470587,"sku":"IMM_82578927","price":3411.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/2635\/1547\/files\/megger-mit1025-vip-kit-600x600-1_fc95667f-48ab-4389-b1c9-306877aa8ba9.jpg?v=1792554521"},{"product_id":"keysight-34465a-bench-multimeter-truevolt-6-5-digit-30-ppm-50000-rdgs-s","title":"Keysight 34465A Bench Multimeter, Truevolt 6.5-Digit, 30 ppm, 50,000 rdgs\/s","description":"\u003ch2\u003eKeysight 34465A Bench Multimeter, Truevolt 6.5-Digit, 30 ppm, 50,000 rdgs\/s\u003c\/h2\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe 34465A is the enhanced model of Keysight's Truevolt bench DMM line, replacing the 34410A and 34411A. Truevolt architecture reduces noise and injected current, giving 30 ppm one-year basic DCV accuracy, ADC linearity to 0.5 ppm and a 1 µA current range with picoamp resolution for very low power devices.\u003c\/p\u003e\n\u003cp\u003eAuto-calibration (ACAL) compensates for temperature drift so measurements stay calibrated through the workday, and the 4.3-inch color graphical display adds histograms, bar and trend charts for faster insight. Reading speed reaches 50,000 readings per second, memory holds 50,000 readings standard (2 million optional), and digitizing with advanced triggering is now included as standard. USB and LAN\/LXI come built in, with GPIB available as an option.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6½-digit resolution, Truevolt technology\u003c\/li\u003e\n\u003cli\u003e30 ppm one-year basic DCV accuracy\u003c\/li\u003e\n\u003cli\u003e50,000 readings per second max reading rate\u003c\/li\u003e\n\u003cli\u003e1 µA range with pA resolution for low-power devices\u003c\/li\u003e\n\u003cli\u003eACAL auto-calibration during temperature drift\u003c\/li\u003e\n\u003cli\u003eHistogram, bar and trend charts on 4.3-inch display\u003c\/li\u003e\n\u003cli\u003eDigitizing and advanced triggering included\u003c\/li\u003e\n\u003cli\u003eUSB and LAN\/LXI standard, GPIB optional\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBench characterization of components and power supplies\u003c\/li\u003e\n\u003cli\u003eLow-power and IoT device current profiling\u003c\/li\u003e\n\u003cli\u003eAutomated production test over USB or LAN\/LXI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e34138 test lead set\u003c\/li\u003e\n\u003cli\u003eUSB cable\u003c\/li\u003e\n\u003cli\u003ePower cord\u003c\/li\u003e\n\u003cli\u003eCertificate of calibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKeysight 34465A Bench Multimeter, Truevolt 6.5-Digit, 30 ppm, 50,000 rdgs\/s Technical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eResolution\u003c\/th\u003e\n\u003ctd\u003e6½ digits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBasic DCV accuracy\u003c\/th\u003e\n\u003ctd\u003e30 ppm (1 year)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax reading rate\u003c\/th\u003e\n\u003ctd\u003e50,000 rdgs\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDCV range\u003c\/th\u003e\n\u003ctd\u003e100 mV to 1000 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eACV range\u003c\/th\u003e\n\u003ctd\u003e100 mV to 750 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDCI range\u003c\/th\u003e\n\u003ctd\u003e1 µA to 10 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eACI range\u003c\/th\u003e\n\u003ctd\u003e100 µA to 10 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eResistance\u003c\/th\u003e\n\u003ctd\u003e100 Ω to 1000 MΩ (2- and 4-wire)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency\/period\u003c\/th\u003e\n\u003ctd\u003e3 Hz to 300 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTemperature\u003c\/th\u003e\n\u003ctd\u003eRTD\/PT100, thermistor, thermocouples\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMemory\u003c\/th\u003e\n\u003ctd\u003e50,000 readings standard, 2 million optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterfaces\u003c\/th\u003e\n\u003ctd\u003eUSB, LAN\/LXI Core; GPIB optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eManufacturer information: \u003ca href=\"https:\/\/keysight.com\/us\/en\/product\/34465A\/digital-multimeter-6-5-digit-truevolt-dmm.html\" target=\"_blank\" rel=\"noopener\"\u003e34465A on keysight.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"Keysight","offers":[{"title":"Default Title","offer_id":67772795060411,"sku":"IMM_67523162","price":1188.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/2635\/1547\/files\/keysight-34465a-digital-multimeter-front-600x600-1_2a56d2ce-63ec-4111-84f0-c07037c11912.jpg?v=1792557276"},{"product_id":"fluke-179-handheld-multimeter","title":"Fluke 179 Handheld Multimeter","description":"\u003ch2\u003eFluke 179 Handheld Multimeter\u003c\/h2\u003e\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eThe Fluke 179 handheld multimeter is a True RMS digital multimeter with a digital display, analog bar graph and built-in temperature measurement, rated CAT IV 600 V \/ CAT III 1000 V.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIEC 1010 CAT IV 600 V, CAT III 1000 V safety rating\u003c\/li\u003e\n\u003cli\u003e6000 count display\u003c\/li\u003e\n\u003cli\u003eTrue-rms ac voltage and current\u003c\/li\u003e\n\u003cli\u003eMin\/Max\/Average recording\u003c\/li\u003e\n\u003cli\u003eFrequency, capacitance and resistance measurement\u003c\/li\u003e\n\u003cli\u003eBacklight for dark workspaces\u003c\/li\u003e\n\u003cli\u003eBattery door that allows battery changes without breaking the calibration seal\u003c\/li\u003e\n\u003cli\u003eDrop protected to 1 meter\u003c\/li\u003e\n\u003cli\u003eOvermolded case with integrated probe holders\u003c\/li\u003e\n\u003cli\u003eCompatible with the ToolPak meter hanging kit\u003c\/li\u003e\n\u003cli\u003eTemperature measurement in °C and °F\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHolster\u003c\/li\u003e\n\u003cli\u003eTL75 test leads\u003c\/li\u003e\n\u003cli\u003e80BK temperature probe\u003c\/li\u003e\n\u003cli\u003e9 V battery (installed)\u003c\/li\u003e\n\u003cli\u003eInstructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFluke 179 Handheld Multimeter Technical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eType: True RMS digital multimeter\u003c\/li\u003e\n\u003cli\u003eDisplay: 6000 count with analog bar graph\u003c\/li\u003e\n\u003cli\u003eSafety rating: IEC 1010 CAT IV 600 V, CAT III 1000 V\u003c\/li\u003e\n\u003cli\u003eDrop protection: 1 m\u003c\/li\u003e\n\u003cli\u003eTemperature units: °C and °F\u003c\/li\u003e\n\u003cli\u003eBattery: 9 V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluke","offers":[{"title":"Default Title","offer_id":67774478713019,"sku":"IMM_26531475","price":151.68,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/2635\/1547\/files\/Fluke-179-600x600-1-1.jpg?v=1792547997"},{"product_id":"flir-t865-42-thermal-imaging-camera-640x480-40c-to-2000c","title":"FLIR T865 42 Thermal Imaging Camera 640x480 -40°C to 2000°C","description":"\u003ch2\u003eFLIR T865 42 Thermal Imaging Camera 640×480 -40°C to 2000°C\u003c\/h2\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe FLIR T865 42 is a professional thermal imaging camera designed for demanding industrial environments. With its 42° field of view and high-resolution 640x480 detector, it captures detailed thermal images even from a distance, making it an essential tool for predictive maintenance, electrical inspections, and research applications. The camera's wide temperature range of -40°C to 2000°C ensures versatility across various industrial processes.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Resolution Imaging:\u003c\/strong\u003e 640x480 pixel detector provides crisp, detailed thermal images for accurate temperature measurement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Temperature Range:\u003c\/strong\u003e Measures from -40°C to 2000°C, suitable for low-temperature electronics to high-temperature furnaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e42° Lens:\u003c\/strong\u003e Offers a broad field of view, ideal for scanning large areas quickly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial Durability:\u003c\/strong\u003e Built to withstand harsh environments, ensuring reliable performance in the field.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Measurement:\u003c\/strong\u003e Delivers accurate thermal data for critical decision-making in maintenance and quality control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cp\u003eThe FLIR T865 42 is widely used in industrial settings for:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePredictive maintenance of electrical and mechanical systems\u003c\/li\u003e\n\u003cli\u003eBuilding diagnostics and energy audits\u003c\/li\u003e\n\u003cli\u003eResearch and development in thermal dynamics\u003c\/li\u003e\n\u003cli\u003eProcess monitoring in manufacturing\u003c\/li\u003e\n\u003cli\u003eSafety inspections in high-temperature environments\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FLIR","offers":[{"title":"Default Title","offer_id":67774510170299,"sku":"IMM_74115746","price":14490.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/2635\/1547\/files\/FLIR-T860-24-14-42-1-600x600-1-1_73ec4725-996f-4469-baaf-3772c7064725.jpg?v=1792548546"},{"product_id":"megger-mit515-insulation-resistance-tester-5-kv-cat-iv-600-v","title":"Megger MIT515 Insulation Resistance Tester, 5 kV, CAT IV 600 V","description":"\u003ch2\u003eMegger MIT515 Insulation Resistance Tester\u003c\/h2\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eThe Megger MIT515 Insulation Resistance Tester has a 5 kV test voltage and CAT IV 600 V safety rating, and measures insulation resistance, voltage, current and capacitance. It supports timed insulation resistance (IR), polarization index (PI), dielectric absorption ratio (DAR), dielectric discharge (DD), step voltage (SV) and ramp tests for installation testing and preventive maintenance.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMeasurement range suited to high-value apparatus and long-term trending\u003c\/li\u003e\n\u003cli\u003eDual case design, fire-retardant and rugged\u003c\/li\u003e\n\u003cli\u003eSilicon test leads meeting IEC 61010-31:2008\u003c\/li\u003e\n\u003cli\u003eLine power operation while charging the battery\u003c\/li\u003e\n\u003cli\u003eFull charge in 2.5 hours; a 30-minute charge provides 1 hour of testing\u003c\/li\u003e\n\u003cli\u003eUp to 6 hours of continuous testing at 5 kV on a single charge\u003c\/li\u003e\n\u003cli\u003eGuard terminal\u003c\/li\u003e\n\u003cli\u003eDedicated voltmeter measuring 30 V to 660 V and frequency, to check for induced voltages\u003c\/li\u003e\n\u003cli\u003eCAT IV 600 V rating on all terminals, maintained up to 3000 m altitude\u003c\/li\u003e\n\u003cli\u003eLarge LCD with automatic backlight\u003c\/li\u003e\n\u003cli\u003eNoise filter rejecting up to 3 mA noise\u003c\/li\u003e\n\u003cli\u003eRotary switch and field replaceable battery\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\u003cp\u003eInsulation resistance testing of high-voltage cables, transformers, motors, generators and switchgear; installation testing, commissioning and periodic maintenance in utility, industrial and commercial settings.\u003c\/p\u003e\n\u003ch3\u003eMegger MIT515 Insulation Resistance Tester Technical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTest voltage: 5 kV\u003c\/li\u003e\n\u003cli\u003eSafety rating: CAT IV 600 V (up to 3000 m)\u003c\/li\u003e\n\u003cli\u003eVoltmeter range: 30 V to 660 V\u003c\/li\u003e\n\u003cli\u003eNoise rejection: up to 3 mA\u003c\/li\u003e\n\u003cli\u003eCharge time: 2.5 hours (full)\u003c\/li\u003e\n\u003cli\u003eBattery run time: up to 6 hours continuous at 5 kV\u003c\/li\u003e\n\u003cli\u003eTests: timed IR, PI, DAR, DD, SV, ramp\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Megger","offers":[{"title":"Default Title","offer_id":67774546247867,"sku":"IMM_67363877","price":2155.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/2635\/1547\/files\/megger-mit515-white.jpg?v=1793092055"},{"product_id":"fluke-tis20-9hz-thermal-imager-120x90-ir-resolution","title":"Fluke TiS20+ 9HZ Thermal Imager, 120x90 IR Resolution","description":"\u003ch2\u003eFluke TiS20+ 9HZ Thermal Imager\u003c\/h2\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Fluke TiS20+ 9HZ thermal imager is engineered for professionals who demand reliability and efficiency in the field. Whether you're working on a rooftop, deep in a plant, or troubleshooting an electrical panel, this camera delivers the performance you need to get the job done quickly and accurately. With its 120x90 infrared detector resolution and advanced IR-Fusion technology, you can pinpoint issues with confidence.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIR-Fusion Technology:\u003c\/strong\u003e Seamlessly blend visual and infrared images with a touchscreen slider to identify problems faster.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong Battery Life:\u003c\/strong\u003e Over 10 hours of continuous operation on a single charge, so you can work all day without interruption.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRugged Design:\u003c\/strong\u003e Withstands a 2-meter drop and is water and dust resistant (IP54), ensuring durability in harsh environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluke Connect Asset Tagging:\u003c\/strong\u003e Scan a QR code to automatically sort and organize thermal images by asset, saving time on reporting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Resolution Display:\u003c\/strong\u003e 3.5-inch touchscreen with 320x240 resolution for clear image viewing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Temperature Range:\u003c\/strong\u003e Measures from -20 °C to 150 °C (-4 °F to 302 °F), suitable for a variety of applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cp\u003eThis thermal imager is ideal for commercial electricians, HVAC\/R technicians, and maintenance professionals who need to inspect electrical systems, detect thermal anomalies, and perform preventive maintenance. Its portability and long battery life make it perfect for field use, while the Fluke Connect integration streamlines data management and reporting.\u003c\/p\u003e","brand":"Fluke","offers":[{"title":"Default Title","offer_id":67774548672699,"sku":"IMM_38676748","price":1194.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/2635\/1547\/files\/Fluke-TIS20-9HZ-600x600-1-1.jpg?v=1792549266"},{"product_id":"seaward-pv150-solarlink-test-kit-1000-v-pv-installation-tester","title":"Seaward PV150 Solarlink Test Kit, 1000 V PV Installation Tester","description":"\u003ch2\u003eSeaward PV150 Solarlink Test Kit, 1000 V PV Installation Tester\u003c\/h2\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe PV150 Solar Installation Test Kit is built around Seaward's PV150 tester, which replaces the three separate instruments traditionally used for PV commissioning by combining earth\/ground continuity, insulation resistance, open circuit voltage, short circuit current, operating current and DC operating power tests in a single handheld unit. Together the kit covers the electrical safety and performance tests required by MCS and IEC\/BS EN 62446.\u003c\/p\u003e\n\u003cp\u003eTesting is fast and safe: single-key measurement, MC4 and Sunclix test lead adaptors for direct connection to modules, strings or arrays, and test inhibition with a warning if ≥30 V AC\/DC is detected at the inputs. The tester stores up to 200 complete test records and downloads them over USB; with Seaward's SolarCert Elements software (supplied separately) it generates professional test certificates. Solarlink wireless connectivity lets the PV150 capture real-time irradiance and temperature from a Solar Survey 200R meter (supplied separately) while electrical tests run, with a range of approximately 100 m.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll IEC\/BS EN 62446 commissioning tests in one handheld tester\u003c\/li\u003e\n\u003cli\u003eOpen circuit voltage measurement up to 1000 V DC with polarity indication\u003c\/li\u003e\n\u003cli\u003eShort circuit current measurement up to 15 A DC\u003c\/li\u003e\n\u003cli\u003eInsulation test at 250\/500\/1000 V\u003c\/li\u003e\n\u003cli\u003eMemory for up to 200 complete test records with USB download\u003c\/li\u003e\n\u003cli\u003eWireless Solarlink to Solar Survey 200R (c. 100 m range)\u003c\/li\u003e\n\u003cli\u003eTest lead null up to 10 Ω for long earth leads\u003c\/li\u003e\n\u003cli\u003eAC\/DC current clamp included for operating current and power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCommissioning and certification of grid-connected PV installations\u003c\/li\u003e\n\u003cli\u003eRoutine solar array performance and safety verification\u003c\/li\u003e\n\u003cli\u003eDocumentation of test results for MCS \/ IEC 62446 compliance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSeaward PV150 Solarlink Test Kit, 1000 V PV Installation Tester Technical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eEarth continuity\u003c\/th\u003e\n\u003ctd\u003e0.01-199 Ω, 4 V DC test, \u0026gt;200 mA (IEC 61557-4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInsulation resistance\u003c\/th\u003e\n\u003ctd\u003e0.05-199 MΩ at 250\/500\/1000 V DC (IEC 61557-2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOpen circuit voltage\u003c\/th\u003e\n\u003ctd\u003e5.0-1000 V DC, 0.1 V resolution, polarity indication\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShort circuit current\u003c\/th\u003e\n\u003ctd\u003e0.5-15.00 A DC, 0.01 A resolution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating current\u003c\/th\u003e\n\u003ctd\u003e0.5-40 A via supplied AC\/DC clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDC operating power\u003c\/th\u003e\n\u003ctd\u003e0.1-40.0 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTest lead compensation\u003c\/th\u003e\n\u003ctd\u003eNull out up to 10 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUser protection\u003c\/th\u003e\n\u003ctd\u003eWarning and test inhibited if ≥30 V AC\/DC at inputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDatalogging\u003c\/th\u003e\n\u003ctd\u003eUp to 200 complete test datasets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnectivity\u003c\/th\u003e\n\u003ctd\u003eUSB to PC; wireless Solarlink to Survey 200R (c. 100 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e6 × 1.5 V LR06 alkaline, \u0026gt;1000 test sequences\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty \/ calibration\u003c\/th\u003e\n\u003ctd\u003e2 years; 1-year calibration interval, UKAS certificate supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eManufacturer information: \u003ca href=\"https:\/\/transcat.com\/media\/pdf\/Seaward-PV150-datasheet.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSeaward PV150 Solar Installation Test Kit datasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Seaward","offers":[{"title":"Default Title","offer_id":67776239468731,"sku":"IMM_19548146","price":978.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/2635\/1547\/files\/seaward-pv150-solarlink-test-kit-600x600-1.jpg?v=1792552262"},{"product_id":"elcometer-319-s1-dewpoint-meter-model-s","title":"Elcometer 319-S1 Dewpoint Meter (Model S)","description":"\u003ch2\u003eElcometer 319-S1 Dewpoint Meter (Model S)\u003c\/h2\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Model S keeps a 10-reading rolling memory and offers manual logging with user-definable limits that trigger visual and audible alarms. Readings are switchable between Celsius and Fahrenheit and time and date stamped, and the gauge meets ISO 8502-4.\u003c\/p\u003e\n\u003cp\u003eThe dustproof and waterproof housing has fully sealed sensors rated equivalent to IP66, integrated magnets let it attach to a steel substrate, and it operates in climates from -20 °C to +80 °C. Each instrument is supplied with a calibration certificate.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMeasures RH, Ta, Ts, Td, TΔ, Tdb, Twb and external temperature\u003c\/li\u003e\n\u003cli\u003eMeets ISO 8502-4\u003c\/li\u003e\n\u003cli\u003e10-reading rolling memory with manual logging\u003c\/li\u003e\n\u003cli\u003eUser-definable limits with visual and audible alarms\u003c\/li\u003e\n\u003cli\u003eDustproof and waterproof, IP66-equivalent sealed sensors\u003c\/li\u003e\n\u003cli\u003eIntegrated magnets for attachment to steel substrates\u003c\/li\u003e\n\u003cli\u003e°C\/°F switchable, time and date stamped readings\u003c\/li\u003e\n\u003cli\u003eCalibration certificate supplied as standard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePre-coating climatic condition checks\u003c\/li\u003e\n\u003cli\u003eProtective coatings and industrial finishing inspection\u003c\/li\u003e\n\u003cli\u003eSurface preparation monitoring to ISO 8502-4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eElcometer 319 Dewpoint Meter Model S\u003c\/li\u003e\n\u003cli\u003e2 × AA batteries\u003c\/li\u003e\n\u003cli\u003eWrist strap\u003c\/li\u003e\n\u003cli\u003eCarry case\u003c\/li\u003e\n\u003cli\u003eCalibration certificate\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eElcometer 319-S1 Dewpoint Meter (Model S) Technical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eG319----S1 (Model S)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eParameters\u003c\/th\u003e\n\u003ctd\u003eRH, Ta, Ts, Td, TΔ, Tdb, Twb, Te (K-type)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 8502-4, BS 7079-B4, IMO MSC.215(82), MSC.244(83)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating climate\u003c\/th\u003e\n\u003ctd\u003e-20 to +80 °C (-4 to +176 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMemory\u003c\/th\u003e\n\u003ctd\u003e10-reading rolling memory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLogging\u003c\/th\u003e\n\u003ctd\u003eManual, time and date stamped\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAlarms\u003c\/th\u003e\n\u003ctd\u003eUser-definable limits, visual and audible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIngress protection\u003c\/th\u003e\n\u003ctd\u003eEquivalent to IP66, fully sealed sensors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExternal probe\u003c\/th\u003e\n\u003ctd\u003eK-type thermocouple, ±2 °C with Elcometer probes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e180 × 75 × 35 mm (7 × 3 × 1.4 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e300 g (0.66 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e2 × AA batteries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eManufacturer information: \u003ca href=\"https:\/\/www.elcometer.com\/en\/elcometer-319-dewpoint-meter.html\" target=\"_blank\" rel=\"noopener\"\u003eElcometer 319 on elcometer.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"Elcometer","offers":[{"title":"Default Title","offer_id":67776447840443,"sku":"IMM_42263736","price":494.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/2635\/1547\/files\/elcometer-instruments-inc-g319-s1-600x600-1.jpg?v=1792553440"},{"product_id":"fluke-87-5-handheld-multimeter-87v-industrial-true-rms-meter-with-temperature","title":"Fluke 87-5 Handheld Multimeter (87V Industrial True-RMS Meter with Temperature)","description":"\u003ch2\u003eFluke 87-5 Handheld Multimeter\u003c\/h2\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe 87V is designed for troubleshooting motor drives and other electrically noisy equipment: a built-in low-pass filter lets it accurately measure voltage and frequency on pulse-width-modulated drive signals. True-RMS AC voltage and current readings stay accurate on non-linear signals, and peak capture records transients as fast as 250 microseconds.\u003c\/p\u003e\n\u003cp\u003eThe 4-1\/2 digit mode gives 19,999-count resolution for precise readings, and the built-in thermometer accepts the included 80BK probe to measure temperature from -40 to 260 degrees Celsius. A large digit display with a two-level bright backlight, analog bargraph and 400-hour battery life make it practical for daily industrial work.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTrue-RMS AC voltage and current\u003c\/li\u003e\n\u003cli\u003eBasic DC accuracy 0.05%\u003c\/li\u003e\n\u003cli\u003e1000 V AC\/DC; 10 A (20 A for 30 seconds)\u003c\/li\u003e\n\u003cli\u003eLow-pass filter for VFD measurements\u003c\/li\u003e\n\u003cli\u003eBuilt-in thermometer with 80BK probe included\u003c\/li\u003e\n\u003cli\u003ePeak capture of transients to 250 microseconds\u003c\/li\u003e\n\u003cli\u003eCapacitance to 9,999 uF; frequency to 200 kHz\u003c\/li\u003e\n\u003cli\u003eCAT III 1000 V, CAT IV 600 V safety rating\u003c\/li\u003e\n\u003cli\u003eMin\/Max\/Average recording and relative mode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTroubleshooting variable frequency drives and motor systems\u003c\/li\u003e\n\u003cli\u003eIndustrial plant automation and power distribution work\u003c\/li\u003e\n\u003cli\u003eElectromechanical equipment and HVAC electrical testing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFluke 87V industrial multimeter\u003c\/li\u003e\n\u003cli\u003eTL75 test leads (TL175 in Europe)\u003c\/li\u003e\n\u003cli\u003eAC175 alligator clips\u003c\/li\u003e\n\u003cli\u003eHolster with tilt-leg and test lead storage\u003c\/li\u003e\n\u003cli\u003e80BK temperature probe\u003c\/li\u003e\n\u003cli\u003e9 V battery (installed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFluke 87-5 Handheld Multimeter Technical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDC voltage\u003c\/th\u003e\n\u003ctd\u003e1000 V max, 10 uV resolution, plus\/minus (0.05% + 1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAC voltage\u003c\/th\u003e\n\u003ctd\u003e1000 V max, true-RMS, plus\/minus (0.7% + 2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAC bandwidth\u003c\/th\u003e\n\u003ctd\u003e20 kHz with low-pass filter, 3 dB at 1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDC current\u003c\/th\u003e\n\u003ctd\u003e10 A (20 A for 30 s), plus\/minus (0.2% + 2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAC current\u003c\/th\u003e\n\u003ctd\u003e10 A true-RMS, plus\/minus (1.0% + 2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eResistance\u003c\/th\u003e\n\u003ctd\u003e50 MOhm max, plus\/minus (0.2% + 1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacitance\u003c\/th\u003e\n\u003ctd\u003e9,999 uF max, 1.0% accuracy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency\u003c\/th\u003e\n\u003ctd\u003eUp to 200 kHz, 0.005% accuracy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTemperature\u003c\/th\u003e\n\u003ctd\u003e-200 to 1090 degrees C with thermocouple probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSafety rating\u003c\/th\u003e\n\u003ctd\u003eCAT III 1000 V, CAT IV 600 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDisplay\u003c\/th\u003e\n\u003ctd\u003e6000 counts, 19,999 in 4-1\/2 digit mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBattery life\u003c\/th\u003e\n\u003ctd\u003e400 hours typical (alkaline, backlight off)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eManufacturer information: \u003ca href=\"https:\/\/www.fluke.com\/en-us\/product\/electrical-testing\/digital-multimeters\/fluke-87v\" target=\"_blank\" rel=\"noopener\"\u003eFluke 87V on fluke.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"Fluke","offers":[{"title":"Default Title","offer_id":67776470810811,"sku":"IMM_75728159","price":195.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/2635\/1547\/files\/fluke-87-5-600x600-1.jpg?v=1792553574"}],"url":"https:\/\/na.indomultimeter.net\/collections\/featured.oembed","provider":"Indo Multimeter","version":"1.0","type":"link"}