Ametek MG TSQ-100M-1/C Hydraulic Deadweight Tester, 1 to 100 kg/cm²
Ametek MG TSQ-100M-1/C Hydraulic Deadweight Tester, 1 to 100 kg/cm²
Ametek MG TSQ-100M-1/C Hydraulic Deadweight Tester
Overview
The TSQ-100M-1/C is the kg/cm² version of AMETEK's Type T hydraulic deadweight tester family. Like all Type T units it uses a re-entrant piston/cylinder, here with a 0.10 in² effective area; fluid pressure on both sides of the cylinder keeps clearance and leakage low as pressure rises.
Built from 300 series stainless steel and Monel, the tester withstands daily industrial use while holding primary-standard accuracy. The dual-volume pump fills the system quickly and then switches to fine control, and the /C suffix means the unit ships with certified effective area, nominal pressure and actual pressure data.
Features
- 1 to 100 kg/cm² range on a single column and piston
- ±0.025% of reading accuracy with test data (/C)
- Re-entrant 0.10 in² piston/cylinder assembly
- Overhung weight carrier reduces side thrust and friction
- Dual-volume lever-action hand pump
- 3-leg base with bulls-eye leveling
- 300 series stainless steel and Monel wetted parts
- Over-pressure protection prevents piston damage
Applications
- Calibration of gauges and transmitters in kg/cm² units
- Bench verification of pressure switches and relief valves
- Primary pressure standards in industrial calibration labs
What's in the Box
- Type T tester with pump, piston and column base
- Weight set
- Tools, test manifold and adapters
- Operation manual
- Certified test data (effective area, nominal and actual pressure)
- NIST-traceable certification
Ametek MG TSQ-100M-1/C Hydraulic Deadweight Tester Technical Specifications
| Type | Hydraulic piston-gauge deadweight tester (Type T) |
|---|---|
| Range | 1 to 100 kg/cm² |
| Accuracy | ±0.025% of reading (-1/C grade) |
| Test data | Included (/C): effective area, nominal and actual pressure |
| Piston area | 0.10 in² |
| Increments | 0.5 kg/cm²; small incremental weight sets available |
| Engineering units | kg/cm² (psi, bar and kPa available family-wide) |
| Repeatability | ±0.005% of reading |
| Gravity | 9.80665 m/s² international standard, or local (specify) |
| Pump | Lever-action, hand-actuated, dual volume |
| Pressure medium | Distilled water/alcohol mix (standard) or AAA oil |
| Wetted materials | 300 series stainless steel, Monel |
| Construction | Single column, single piston, 3-leg base with bulls-eye level |
| Weight | Tester and case 22.7 kg (50 lb) |
Manufacturer information: Type T on ametekcalibration.com.