Ametek M&G TSQ-700B-1AL/C Hydraulic Deadweight Tester, 10–700 bar
$8,806.00
Skip to product information
Ametek M&G TSQ-700B-1AL/C Hydraulic Deadweight Tester, 10–700 bar
$8,806.00
Ametek M&G TSQ-700B-1AL/C Hydraulic Deadweight Tester
Overview
The Type T uses a re-entrant piston/cylinder design that reduces leakage as pressure rises, increasing float time. An overhung weight carrier lowers the centre of gravity, reducing side thrust and friction.
Wetted parts are 300-series stainless steel and Monel, and the tester works with water/alcohol mix or hydraulic oil. Over-pressure protection prevents piston damage if weights are removed under pressure.
Features
- Range 10–700 bar
- Accuracy ±0.015% of reading
- Re-entrant piston/cylinder for long float time
- Overhung weight carrier reduces side thrust
- Dual-volume pump for fast fill and fine control
- Local gravity, with calibration data
- 5 bar increments
Applications
- Pressure gauge calibration
- Transmitter and switch calibration
- Primary standard in calibration labs
Ametek M&G TSQ-700B-1AL/C Hydraulic Deadweight Tester Technical Specifications
| Range | 10–700 bar |
|---|---|
| Accuracy | ±0.015% of reading |
| Configuration | single-column, single-piston |
| Wetted parts | 300-series stainless steel, Monel |
| Test fluid | Water/alcohol mix or MGAAA oil |
| Reservoir | 1.23 L (75 in³) |
| Tester and case weight | 22.7 kg |
Manufacturer information: Type T deadweight tester on ametekcalibration.com.