Compliance West
Compliance West MP-1.2X50-7PF-39 Surge Tester, MegaPulse 1.2x50-7PF, 2000 to 7000 V, 38 Ω
Card or bank transfer · proforma invoice on request
Key specs from the product description
- Output peak voltage at 7000 V setting
- 6620 V ±3%
- Open-circuit rise time
- 1.14 µs ±30% (per IEC 1180)
- Open-circuit duration
- 56.69 µs ±20% (time to half value)
- Virtual impedance
- 38 Ω
- Current waveform
- not defined
- Voltage control
- front-panel knob or USB (TestMinder PF)
Get a firm price
Ordered from the manufacturer for you. Send this form; we typically reply within one working day.
- 1Send the requestTakes a minute
- 2Get your priceTypically one working day
- 3Pay, we shipCard or bank transfer
- 30-day money-back if the item arrives defective, damaged or wrong. Policy
- Traceable calibration documentation ships with instruments
- Pay by card or bank transfer, invoice on request
- We ship worldwide. Destination confirmed with your quote
Datasheets & manuals
Manufacturer pages
Compliance West MP-1.2X50-7PF-39 Surge Tester, MegaPulse 1.2x50-7PF, 2000 to 7000 V, 38 Ω
Overview
The MegaPulse 1.2x50-7PF is designed for testing to IEC 60950 (including the Australian Deviation), IEC 62368-1 and ITU-T standards. A self-regulating high-voltage power supply keeps the bulk capacitor voltage stable, and the front-panel meter reads the bulk cap voltage directly as required by the standard test procedure.
Output voltage is set with a digital knob on the front panel or optionally over USB with the TestMinder PF computer control, which also provides auto-triggering. The tester is calibrated at bulk cap voltages of 2 kV and 7 kV to match the IEC 60950 test points, and an optional IER switch adds IEC 60065 Figure 7B testing. ISO 17025 calibration is available.
Features
- 1.2/50 µs voltage waveform at bulk capacitor voltages of 2000 to 7000 V
- 38 Ω virtual impedance for IEC 60950 / IEC 62368-1 / ITU-T testing
- Self-regulating high-voltage supply with front-panel digital control
- External interlock disables high-voltage output when the circuit is open
- Optional USB TestMinder PF computer control with auto-trigger
- Optional IER switch for IEC 60065 Figure 7B testing
- Calibrated at 2 kV and 7 kV; ISO 17025 calibration available
Applications
- IEC 60950 Annex N compliance testing (incl. Australian Deviation)
- IEC 62368-1 and ITU-T equipment testing
- Surge withstand verification of power supplies and telecom products
What's in the Box
- Leads, instruction manual and calibration certificate
Compliance West MP-1.2X50-7PF-39 Surge Tester, MegaPulse 1.2x50-7PF, 2000 to 7000 V, 38 Ω Technical Specifications
| Output peak voltage at 7000 V setting | 6620 V ±3% |
|---|---|
| Open-circuit rise time | 1.14 µs ±30% (per IEC 1180) |
| Open-circuit duration | 56.69 µs ±20% (time to half value) |
| Virtual impedance | 38 Ω |
| Current waveform | not defined |
| Voltage control | front-panel knob or USB (TestMinder PF) |
| Polarity | positive and negative; alternating control with USB |
| Voltage meter | 4-digit LED display, 5 V resolution, ±1% accuracy |
| Duty cycle | 12 pulses/min with 5 s between pulses, then 45 s rest |
| Charge time | <5 s (2 s min) |
| Line voltage | 120 V AC, 50/60 Hz (100, 110, 220, 230 and 240 V optional) |
| Safety interlock | 2-pin terminal block on rear panel, shorted for operation |
| Rear outputs | TestMinder DB9 female (optional), safety interlock, inlet module with fuse and switch |
Manufacturer information: MegaPulse 1.2x50-7PF on compwest.com.
Price $2,549.00 USD as listed on 05 Nov 2026. Request a firm quote: https://na.indomultimeter.net/products/compliance-west-mp-1-2x50-7pf-39-surge-tester-megapulse-1-2x50-7pf-2000-to-7000-v-38-ohm
Shipping. We ship worldwide. See the shipping policy.
Documents. Instruments ship with calibration documentation traceable to national standards. Some models, such as the Mensor CPG2500, also ship with an A2LA accredited ISO/IEC 17025 certificate.
Warranty. See the warranty policy.
Before you order
Is the price final?
The price shown is our current price in USD. Your quote confirms price and availability for your quantity.
How is my item supplied?
Items are ordered from the manufacturer for you. The quote confirms availability. Typical response is within one working day.
Do you provide calibration certificates?
Instruments ship with calibration documentation traceable to national standards. Ask in your request if you need a specific certificate.
How can I pay?
By card or by bank transfer. We can send a proforma invoice for your purchasing department.
Do you ship to my country?
We ship worldwide. Put your destination country in your enquiry and we confirm delivery with your quote.
What if it arrives defective, damaged or wrong?
You get a 30-day money-back guarantee for items that arrive defective, damaged or wrong. See the refund policy.