

PIE
PIE 334Plus Loop Calibrator, Source, Read, Power and Measure
Card or bank transfer · proforma invoice on request
Key specs from the product description
- Source range
- 0.000 to 24.000 mA
- Read range
- 0.000 to 52.000 mA
- Read % of 4-20 mA
- -25.0 to 125.0%
- DC voltage read
- -99.99 to 99.99 V
- Source accuracy
- ±0.025% of span at 4 and 20 mA
- Resolution
- 0.001 mA
Get a firm price
Ordered from the manufacturer for you. Send this form; we typically reply within one working day.
- 1Send the requestTakes a minute
- 2Get your priceTypically one working day
- 3Pay, we shipCard or bank transfer
- 30-day money-back if the item arrives defective, damaged or wrong. Policy
- Traceable calibration documentation ships with instruments
- Pay by card or bank transfer, invoice on request
- We ship worldwide. Destination confirmed with your quote
Datasheets & manuals
Manufacturer pages
PIE 334Plus Loop Calibrator
Overview
The 334Plus calibrates mA instruments at any access point in a loop. It sources and reads current, reads percentage of 4-20 mA span and measures DC voltage for power supply troubleshooting.
Its patented ground-leak detection powers a loop and displays both the total current and the uncontrolled leakage current, exposing faults caused by moisture, corrosion or broken insulation. Automatic stepping (2, 3 or 5 steps) and continuous ramping speed up calibration runs.
Features
- Source and read 0.000 to 24.000 mA
- Read loop current to 52.000 mA
- Read -25.0 to 125.0% of 4-20 mA
- Simulate a 2-wire transmitter with 2 to 100 V DC loop power
- Power and measure 2-wire transmitters
- Menu-selectable 250 Ω resistor for HART
- Ground leak detection with automatic leakage indication
- EZ-CHECK 3-output switch and 2-speed EZ-DIAL stepping and ramping
- Backlit display
- Includes rubber boot and test leads
Applications
- 4-20 mA transmitter calibration
- Loop wiring and receiver checks
- Troubleshooting current leakage to ground
What's in the Box
- PIECAL 334Plus calibrator
- Rubber boot
- Test leads
PIE 334Plus Loop Calibrator Technical Specifications
| Source range | 0.000 to 24.000 mA |
|---|---|
| Read range | 0.000 to 52.000 mA |
| Read % of 4-20 mA | -25.0 to 125.0% |
| DC voltage read | -99.99 to 99.99 V |
| Source accuracy | ±0.025% of span at 4 and 20 mA |
| Resolution | 0.001 mA |
| 2-wire transmitter simulation | 0.000 to 24.000 mA |
| Loop power (simulate mode) | 2 to 100 V DC |
| HART compatibility | Menu-selectable 250 Ω resistor |
| Loop drive capability | 24 V DC nominal, up to 1200 Ω at 20 mA |
| Display | 5-digit, backlit |
| Output control | EZ-CHECK 3-position switch; EZ-DIAL 2-speed stepping and ramping |
Manufacturer information: 334Plus on piecal.com.
Price $552.00 USD as listed on 05 Nov 2026. Request a firm quote: https://na.indomultimeter.net/products/pie-334plus-loop-calibrator-source-read-power-and-measure
Shipping. We ship worldwide. See the shipping policy.
Documents. Instruments ship with calibration documentation traceable to national standards. Some models, such as the Mensor CPG2500, also ship with an A2LA accredited ISO/IEC 17025 certificate.
Warranty. See the warranty policy.
Before you order
Is the price final?
The price shown is our current price in USD. Your quote confirms price and availability for your quantity.
How is my item supplied?
Items are ordered from the manufacturer for you. The quote confirms availability. Typical response is within one working day.
Do you provide calibration certificates?
Instruments ship with calibration documentation traceable to national standards. Ask in your request if you need a specific certificate.
How can I pay?
By card or by bank transfer. We can send a proforma invoice for your purchasing department.
Do you ship to my country?
We ship worldwide. Put your destination country in your enquiry and we confirm delivery with your quote.
What if it arrives defective, damaged or wrong?
You get a 30-day money-back guarantee for items that arrive defective, damaged or wrong. See the refund policy.
