Sartorius Cubis II MCE1203S-2S00-A Precision Balance, 1200 g x 1 mg, Draft Shield A
Sartorius Cubis II MCE1203S-2S00-A Precision Balance, 1200 g x 1 mg, Draft Shield A
Sartorius Cubis II MCE1203S-2S00-A Precision Balance
Overview
The 1203S module specifies a 1 mg scale interval over 1200 g with 0.7 mg repeatability tolerance, 2 mg linearity tolerance and 1.5 ppm/K sensitivity drift, verified by isoCAL automatic internal adjustment (triggered at 1.5 K temperature change or 12 hours). Accuracy class I applies with a 10 mg verification scale interval, and the recommended calibration weight is a 1000 g E2 weight. Typical stabilization time is about 1 second.
The MCE control unit drives a TFT touch screen with basic weighing applications and supports manual calibration/alibi storage of 300,000 records, an audit trail of 300,000 data points, and RS-232 (D-sub 9), USB-A host and USB-B device interfaces. Power comes from 100-240 V (±10%), 50-60 Hz; operation is specified from +5 to +40 °C at up to 80% relative humidity, and the draft shield A chamber gives 154×250×192 mm (D×H×W) of usable space with a 140 × 140 mm weighing pan.
Features
- 1200 g capacity with 1 mg (0.001 g) readability (1203S module)
- Repeatability tolerance 0.7 mg and linearity tolerance 2 mg
- isoCAL automatic internal adjustment at 1.5 K drift or 12 h interval
- Automatic glass draft shield with motorized, self-learning opening
- MCE TFT touch screen with basic weighing applications
- Alibi memory 300,000 records and audit trail 300,000 data points
- RS-232, USB-A host and USB-B device interfaces; 100-240 V supply
Applications
- Precision weighing in QC and research laboratories
- Formula preparation and differential weighing up to 1200 g
- Applications requiring documentation (audit trail, alibi memory)
Sartorius Cubis II MCE1203S-2S00-A Precision Balance Technical Specifications
| Maximum capacity | 1200 g |
|---|---|
| Scale interval (readability) | 1 mg (0.001 g) |
| Repeatability | 0.7 mg tolerance (5% load and near max) |
| Linearity | 2 mg tolerance |
| Sensitivity drift | 1.5 ppm/K |
| Accuracy class | I (e = 10 mg) |
| Minimum load | 100 mg |
| Stabilization time | 1 s (measurement time 1.5 s) |
| Calibration | isoCAL (1.5 K / 12 h); recommended 1000 g E2 weight |
| Draft shield A | Automatic, glass; inner 154 × 250 × 192 mm (D × H × W) |
| Interfaces | RS-232 (D-sub 9), USB-A host, USB-B device |
| Power | AC 100-240 V (±10%), 50-60 Hz |
Manufacturer information: Cubis II data sheet on sartorius.com (PDF).