Ametek MG T-110/TESTER-1/C/EPT Deadweight Tester, 100 to 10,000 psi
$6,060.00
Skip to product information
Ametek MG T-110/TESTER-1/C/EPT Deadweight Tester, 100 to 10,000 psi
$6,060.00
Ametek MG T-110/TESTER-1/C/EPT Deadweight Tester
Overview
The Type T hydraulic deadweight tester from Ametek Mansfield and Green offers laboratory accuracy in a package built for industrial environments. The re-entrant measuring piston and cylinder reduce fluid leakage and increase float time, helping to maintain accuracy as test pressure rises.
A dual-volume pump fills the system quickly at low pressure, then switches to a smaller volume for fine control at higher pressures. An overhung weight carrier reduces side thrust and friction, and this single-column unit is fitted with EPT O-rings and the -1/C traceable calibration data option.
Features
- Range 100 to 10,000 psi in 50 psi increments
- Accuracy to ±0.015% of reading (±0.025% with -1/C calibration data)
- Re-entrant measuring piston and cylinder
- Overhung weight carrier, single column
- Dual-volume lever-operated pump
- Over-pressure protection for the piston
- 3-leg base with bulls-eye level
- Traceable calibration data included
Applications
- Pressure gauge and transmitter calibration
- Laboratory metrology standards work
- Industrial instrument verification
Ametek MG T-110/TESTER-1/C/EPT Deadweight Tester Technical Specifications
| Model | T-110/TESTER-1/C/EPT, single-column hydraulic |
|---|---|
| Pressure range | 100 to 10,000 psi |
| Pressure increments | 50 psi |
| Piston area | 0.01 in² |
| Accuracy | To ±0.015% of reading; ±0.025% with -1/C calibration data |
| Piston / cylinder | Re-entrant measuring piston and cylinder |
| Weight carrier | Overhung, single column |
| Pump | Dual-volume lever-operated pump |
| Leveling | 3-leg base with bulls-eye level |
| Construction | 300 series stainless steel and Monel |
| O-rings | Buna-N standard; EPT fitted on this unit |
| Medium | Water/alcohol or hydraulic oil |
| Over-pressure protection | Included |
Manufacturer information: Type T on ametekcalibration.com.