Megger Baker 99-EP1000-1500RC Motor Link, 1500 A Split-Core CTs
$758.00
Skip to product information
Megger Baker 99-EP1000-1500RC Motor Link, 1500 A Split-Core CTs
$758.00
Megger Baker 99-EP1000-1500RC Motor Link, 1500 A Split-Core CTs
Overview
Dynamic (online) motor testing inside a motor control cabinet exposes personnel to arc flash hazards. With the EP1000 installed in the MCC, testing is done from outside: the user attaches one cable from the EXP4000 to the exterior port, and the Surveyor EXP software loads the motor's test data automatically.
The EP1000 is passive and unpowered when the analyzer is detached, with peak operating voltage of 5 V or less. It connects directly to motors up to 1000 V and tests higher-voltage motors through MCC PTs and CTs. Typical data acquisition takes one to four minutes.
Features
- Single-cable connection eliminates misconnections
- 3 × 1500 A split-core CTs, 600 V max, 2 × 2 in window
- MCC door connector plate and cable included
- Direct connection to motors up to 1000 V
- Higher-voltage motors tested via PTs and CTs
- Passive, un-powered when analyzer is detached
- Peak operating voltage 5 V or less
- One to four minute data acquisition
Applications
- Arc flash risk reduction during online motor monitoring
- Permanent dynamic motor monitoring installations
- Continuous electrical data capture without stopping motors
Megger Baker 99-EP1000-1500RC Motor Link, 1500 A Split-Core CTs Technical Specifications
| Product ID | 99-EP1000-1500RC (EP1000-1500 bundle) |
|---|---|
| Max voltage input | 1000 V |
| Current transformers | 3 × 1500 A split-core, 600 V max, 2 × 2 in ID |
| Mounting hardware | MCC door connector plate and cable |
| Compatible analyzer | Baker EXP4000 Dynamic Motor Analyzer |
| Operating principle | Passive link, peak voltage ≤ 5 V during operation |
| Typical data acquisition time | 1 to 4 minutes |
| Manufacturer | Megger Baker Instruments, Fort Collins, CO, USA |
Manufacturer information: Baker EXP4000 on megger.com.